This paper presents a mesh sensitivity analysis for the finite element model of a coaxial magnetic gear featuring bridged modulator segments, introduced to reduce the torque ripple associated with rectangular permanent magnets. The analysis is motivated by the need to balance accuracy and computational cost prior to an extensive parametric study of the bridge geometry. A full-factorial sweep of 846 mesh configurations is performed and the results are analysed through a bi-objective Pareto framework and a one-at-a-time sensitivity study. The air gap discretisation is identified as the dominant factor governing torque accuracy, while the iron and magnet mesh parameters have comparatively minor influence. The recommended knee-point configuration reduces the per-simulation time by approximately 79% relative to the fine-mesh reference while maintaining a torque error below 0.15%.

Mesh Density Optimization of Coaxial Magnetic Gear / Roscioli, S., Amoresano, A., Marinova, I., Mateev, V., Pio, L.. - (2026). (24th International Symposium on Electrical Apparatus and Technologies, SIELA 2026 bgr 2026) [10.1109/SIELA69011.2026.11686624].

Mesh Density Optimization of Coaxial Magnetic Gear

Roscioli S.;Amoresano A.;
2026

Abstract

This paper presents a mesh sensitivity analysis for the finite element model of a coaxial magnetic gear featuring bridged modulator segments, introduced to reduce the torque ripple associated with rectangular permanent magnets. The analysis is motivated by the need to balance accuracy and computational cost prior to an extensive parametric study of the bridge geometry. A full-factorial sweep of 846 mesh configurations is performed and the results are analysed through a bi-objective Pareto framework and a one-at-a-time sensitivity study. The air gap discretisation is identified as the dominant factor governing torque accuracy, while the iron and magnet mesh parameters have comparatively minor influence. The recommended knee-point configuration reduces the per-simulation time by approximately 79% relative to the fine-mesh reference while maintaining a torque error below 0.15%.
2026
Mesh Density Optimization of Coaxial Magnetic Gear / Roscioli, S., Amoresano, A., Marinova, I., Mateev, V., Pio, L.. - (2026). (24th International Symposium on Electrical Apparatus and Technologies, SIELA 2026 bgr 2026) [10.1109/SIELA69011.2026.11686624].
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11588/1070114
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? ND
social impact