In this work, a method for estimating Pulse Transit Time (PTT) using a Fiber Bragg Grating (FBG) sensor is proposed. PTT is widely recognized as a valuable surrogate parameter for continuous blood pressure monitoring, as it enables beat-to-beat assessment, unlike conventional oscillometric and auscultatory methods that provide only intermittent measurements. The proposed approach relies on an FBG sensor embedded in an elastomeric medium (silicone), whose elastic properties allow efficient transfer of the strain induced by the arterial pulse wave (PW) to the optical sensing element. In this study, PTT is estimated as the time interval between the R-peak of the electrocardiographic (ECG) signal acquired using an AD8232 module and the maximum peak of the PW measured by the FBG sensor, which is integrated into one of the ECG clamps. The measured PTT showed an average value of 0.40 ± 0.08 s. The proposed solution represents an alternative to conventional PTT estimation methods, in which the PW is typically acquired using photoplethysmography (PPG), potentially enabling more robust and flexible sensing configurations.
Estimation of Pulse Transit Time Using Fiber Bragg Grating Sensors / Cuomo, M., Gragnaniello, M., De Vita, E., Iadicicco, A., Riccio, M., Campopiano, S.. - (2026), pp. 731-736. (9th IEEE International Workshop on Metrology for Industry 4.0 and IoT, MetroInd4.0 and IoT 2026 Universita Campus Bio-Medico di Roma (UCBM), ita 2026) [10.1109/metroind4.0iot69397.2026.11653189].
Estimation of Pulse Transit Time Using Fiber Bragg Grating Sensors
Gragnaniello, MariaCo-primo
;Iadicicco, Agostino;Riccio, Michele;Campopiano, Stefania
2026
Abstract
In this work, a method for estimating Pulse Transit Time (PTT) using a Fiber Bragg Grating (FBG) sensor is proposed. PTT is widely recognized as a valuable surrogate parameter for continuous blood pressure monitoring, as it enables beat-to-beat assessment, unlike conventional oscillometric and auscultatory methods that provide only intermittent measurements. The proposed approach relies on an FBG sensor embedded in an elastomeric medium (silicone), whose elastic properties allow efficient transfer of the strain induced by the arterial pulse wave (PW) to the optical sensing element. In this study, PTT is estimated as the time interval between the R-peak of the electrocardiographic (ECG) signal acquired using an AD8232 module and the maximum peak of the PW measured by the FBG sensor, which is integrated into one of the ECG clamps. The measured PTT showed an average value of 0.40 ± 0.08 s. The proposed solution represents an alternative to conventional PTT estimation methods, in which the PW is typically acquired using photoplethysmography (PPG), potentially enabling more robust and flexible sensing configurations.| File | Dimensione | Formato | |
|---|---|---|---|
|
Estimation_of_Pulse_Transit_Time_Using_Fiber_Bragg_Grating_Sensors.pdf
solo utenti autorizzati
Tipologia:
Versione Editoriale (PDF)
Licenza:
Copyright dell'editore
Dimensione
1.2 MB
Formato
Adobe PDF
|
1.2 MB | Adobe PDF | Visualizza/Apri Richiedi una copia |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.


