The paper describes a vectorial control strategy for induction motor fed by VSI which allows to exploit the dynamic performances by taking into account both the rotor and stator time constant, and avoiding at the same time the use of current control loop. It is based on the step-by-step evaluation of the feeding voltage of the motor, in such a way as to achieve the imposed space vector of the stator current, corresponding to the reference values of the electromagnetic torque and flux. The strategy has been implemented on fully DSP-based control architecture for speed control of an induction motor drive. Experimental results are presented and compared with the ones obtained with an hysteresis current control loop. They show a very good behaviour of the system, both in dynamic and steady state operating conditions

Voltage vectorial control of an induction motor drive / Attaianese, C.; Tomasso, G.; Perfetto, Aldo; Damiano, A.; Marongiu, I.. - STAMPA. - 1:(1998), pp. 283-288. (Intervento presentato al convegno International Symposium on Industrial Electronics, 1998. ISIE '98. IEEE tenutosi a Pretoria nel 7-10 Jul 1998).

Voltage vectorial control of an induction motor drive

PERFETTO, ALDO;
1998

Abstract

The paper describes a vectorial control strategy for induction motor fed by VSI which allows to exploit the dynamic performances by taking into account both the rotor and stator time constant, and avoiding at the same time the use of current control loop. It is based on the step-by-step evaluation of the feeding voltage of the motor, in such a way as to achieve the imposed space vector of the stator current, corresponding to the reference values of the electromagnetic torque and flux. The strategy has been implemented on fully DSP-based control architecture for speed control of an induction motor drive. Experimental results are presented and compared with the ones obtained with an hysteresis current control loop. They show a very good behaviour of the system, both in dynamic and steady state operating conditions
1998
0780347560
Voltage vectorial control of an induction motor drive / Attaianese, C.; Tomasso, G.; Perfetto, Aldo; Damiano, A.; Marongiu, I.. - STAMPA. - 1:(1998), pp. 283-288. (Intervento presentato al convegno International Symposium on Industrial Electronics, 1998. ISIE '98. IEEE tenutosi a Pretoria nel 7-10 Jul 1998).
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11588/459088
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact