This paper presents experimental and numerical analyses of a novel high-temperature solar cooling system based on innovative flat-plate evacuated solar thermal collectors (SC). This is the first solar cooling system, including a double-effect absorption chiller, which is based on non-concentrating solar thermal collectors. The aim of the paper is prove the technical and economic feasibility of the system, also presenting a comparison with a conventional technology, based on concentrating solar thermal collectors. To this scope, an experimental setup has been installed in Saudi Arabia. Here, several measurement devices are installed in order to monitor and control all the thermodynamic parameters of the system. The paper presents some of the main results of this experimental campaign, showing temperatures, powers, energies and efficiencies for a selected period. Experimental results showed that collector peak efficiency is higher than 60%, whereas daily average efficiency is around 40%. This prototypal solar cooling system has been numerically analysed, developing a dynamic simulation model aiming at predicting system performance. For a representative operating period, numerical data were compared with the experimental one, showing an excellent accuracy of the model. A similar system, equipped with Parabolic Trough solar thermal collectors (PTC) was also simulated in order to compare the novel solar collectors with such reference technology. For both systems a detailed thermo-economic model has been implemented in order to perform such comparison also from the economic point of view. Results showed that the rated energy performance of the prototypal solar cooling system featuring new collectors is better than that of the reference system. In particular, the difference between the novel and the reference solar cooling system becomes more and more significant, when considering the effects of dust and defocusing related to the tracking mechanism of concentrating collectors in harsh environments. Finally, from the economic point of view, results showed that the novel prototype was able to achieve a good profitability.
Experimental analysis and dynamic simulation of a novel high-temperature solar cooling system / Buonomano, Annamaria; Calise, Francesco; DENTICE D'ACCADIA, Massimo; Ferruzzi, Gabriele; Frascogna, Sabrina; Palombo, Adolfo; Russo, Roberto; Scarpellino, Marco. - In: ENERGY CONVERSION AND MANAGEMENT. - ISSN 0196-8904. - 109:(2016), pp. 19-39. [10.1016/j.enconman.2015.11.047]
Experimental analysis and dynamic simulation of a novel high-temperature solar cooling system
BUONOMANO, ANNAMARIA;CALISE, FRANCESCO;DENTICE D'ACCADIA, MASSIMO;FERRUZZI, GABRIELE;PALOMBO, ADOLFO;
2016
Abstract
This paper presents experimental and numerical analyses of a novel high-temperature solar cooling system based on innovative flat-plate evacuated solar thermal collectors (SC). This is the first solar cooling system, including a double-effect absorption chiller, which is based on non-concentrating solar thermal collectors. The aim of the paper is prove the technical and economic feasibility of the system, also presenting a comparison with a conventional technology, based on concentrating solar thermal collectors. To this scope, an experimental setup has been installed in Saudi Arabia. Here, several measurement devices are installed in order to monitor and control all the thermodynamic parameters of the system. The paper presents some of the main results of this experimental campaign, showing temperatures, powers, energies and efficiencies for a selected period. Experimental results showed that collector peak efficiency is higher than 60%, whereas daily average efficiency is around 40%. This prototypal solar cooling system has been numerically analysed, developing a dynamic simulation model aiming at predicting system performance. For a representative operating period, numerical data were compared with the experimental one, showing an excellent accuracy of the model. A similar system, equipped with Parabolic Trough solar thermal collectors (PTC) was also simulated in order to compare the novel solar collectors with such reference technology. For both systems a detailed thermo-economic model has been implemented in order to perform such comparison also from the economic point of view. Results showed that the rated energy performance of the prototypal solar cooling system featuring new collectors is better than that of the reference system. In particular, the difference between the novel and the reference solar cooling system becomes more and more significant, when considering the effects of dust and defocusing related to the tracking mechanism of concentrating collectors in harsh environments. Finally, from the economic point of view, results showed that the novel prototype was able to achieve a good profitability.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
