Electrolyzer and fuel cells based on proton-conducting solid oxide ceramics (PC-SOEC/FC) are gaining wide interest as promising green technologies for H-2 production and conversion. Despite major advances in PC electrolytes, large-scale deployment of PC-SOEC/FC has been hindered by severe limitations at electrodes, which must ensure catalytic activity, electronic conduction, and high proton diffusion rates. Designing electrodes with mixed proton and electron conduction capability represents a great challenge. Several attempts have been based on composite materials made of common electrocatalysts and PC electrolytes, but the resulting electrodes have often suffered stability and conductivity problems. Inspired by the good performance in PC regime of some perovskite oxides, here we propose an alternative approach by designing a new single-phase triple-conducting oxide (TCO) from the recently proposed and well-tested mixed ion-electron conductive electrocatalyst Sr2Fe1.5Mo0.5O6-delta (SFMO) double perovskite. We investigated with first-principles methods (DFT+U) the key processes that promote proton transport, i.e., oxygen vacancy formation, water dissociative incorporation into the defective lattice, and proton transfer along the oxide sublattice. We focused on SFMO and A-substituted derivatives with Ba or K cations. Both dopants lower the proton migration barrier of SFMO, thus improving proton transport effectiveness. In particular, we found K-doped SFMO to be the best candidate thanks to its peculiar and very favorable structural and electronic properties. Moreover, from our ab initio analysis, we identified a general design principle to enhance proton transport in perovskite oxides at the nanoscale. Our computational results can be easily implemented to develop and test new low-cost TCO-based electrodes for PC-SOEC/FC.

First-Principles Design of New Electrodes for Proton-Conducting Solid-Oxide Electrochemical Cells: A-Site Doped Sr2Fe1.5Mo0.5O6-δ Perovskite / MUNOZ GARCIA, ANA BELEN; Pavone, Michele. - In: CHEMISTRY OF MATERIALS. - ISSN 0897-4756. - 28:2(2016), pp. 490-500. [10.1021/acs.chemmater.5b03262]

First-Principles Design of New Electrodes for Proton-Conducting Solid-Oxide Electrochemical Cells: A-Site Doped Sr2Fe1.5Mo0.5O6-δ Perovskite

MUNOZ GARCIA, ANA BELEN;PAVONE, MICHELE
2016

Abstract

Electrolyzer and fuel cells based on proton-conducting solid oxide ceramics (PC-SOEC/FC) are gaining wide interest as promising green technologies for H-2 production and conversion. Despite major advances in PC electrolytes, large-scale deployment of PC-SOEC/FC has been hindered by severe limitations at electrodes, which must ensure catalytic activity, electronic conduction, and high proton diffusion rates. Designing electrodes with mixed proton and electron conduction capability represents a great challenge. Several attempts have been based on composite materials made of common electrocatalysts and PC electrolytes, but the resulting electrodes have often suffered stability and conductivity problems. Inspired by the good performance in PC regime of some perovskite oxides, here we propose an alternative approach by designing a new single-phase triple-conducting oxide (TCO) from the recently proposed and well-tested mixed ion-electron conductive electrocatalyst Sr2Fe1.5Mo0.5O6-delta (SFMO) double perovskite. We investigated with first-principles methods (DFT+U) the key processes that promote proton transport, i.e., oxygen vacancy formation, water dissociative incorporation into the defective lattice, and proton transfer along the oxide sublattice. We focused on SFMO and A-substituted derivatives with Ba or K cations. Both dopants lower the proton migration barrier of SFMO, thus improving proton transport effectiveness. In particular, we found K-doped SFMO to be the best candidate thanks to its peculiar and very favorable structural and electronic properties. Moreover, from our ab initio analysis, we identified a general design principle to enhance proton transport in perovskite oxides at the nanoscale. Our computational results can be easily implemented to develop and test new low-cost TCO-based electrodes for PC-SOEC/FC.
2016
First-Principles Design of New Electrodes for Proton-Conducting Solid-Oxide Electrochemical Cells: A-Site Doped Sr2Fe1.5Mo0.5O6-δ Perovskite / MUNOZ GARCIA, ANA BELEN; Pavone, Michele. - In: CHEMISTRY OF MATERIALS. - ISSN 0897-4756. - 28:2(2016), pp. 490-500. [10.1021/acs.chemmater.5b03262]
File in questo prodotto:
File Dimensione Formato  
2016-CM-BaK-SFMO.pdf

solo utenti autorizzati

Descrizione: Articolo principale
Tipologia: Documento in Post-print
Licenza: Accesso privato/ristretto
Dimensione 2.39 MB
Formato Adobe PDF
2.39 MB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11588/651332
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 97
  • ???jsp.display-item.citation.isi??? 93
social impact