In parallel with the programme to optimize the operation with a conventional divertor based on detached conditions to be tested on the ITER device, a project has been launched to investigate alternative power exhaust solutions for DEMO, aimed at the definition and the design of a divertor tokamak test facility (DTT). The DTT project proposal refers to a set of parameters selected so as to have edge conditions as close as possible to DEMO, while remaining compatible with DEMO bulk plasma performance in terms of dimensionless parameters and given constraints. The paper illustrates the DTT project proposal, referring to a 6 MA plasma with a major radius of 2.15 m, an aspect ratio of about 3, an elongation of 1.6-1.8, and a toroidal field of 6 T. This selection will guarantee sufficient flexibility to test a wide set of divertor concepts and techniques to cope with large heat loads, including conventional tungsten divertors; liquid metal divertors; both conventional and advanced magnetic configurations (including single null, snow flake, quasi snow flake, X divertor, double null); internal coils for strike point sweeping and control of the width of the scrape-off layer in the divertor region; and radiation control. The Poloidal Field system is planned to provide a total flux swing of more than 35 Vs, compatible with a pulse length of more than 100 s. This is compatible with the mission of studying the power exhaust problem and is obtained using superconducting coils. Particular attention is dedicated to diagnostics and control issues, especially those relevant for plasma control in the divertor region, designed to be as compatible as possible with a DEMO-like environment. The construction is expected to last about seven years, and the selection of an Italian site would be compatible with a budget of 500 M.
DTT: A divertor tokamak test facility for the study of the power exhaust issues in view of DEMO / Affinito, L.; Anemona, A.; Apicella, M. L.; Batistoni, P.; Calabrò, G.; Cardinali, A.; Ceccuzzi, S.; Centioli, C.; Corato, V.; Costa, P.; Crisanti, F.; Cucchiaro, A.; Della Corte, A.; De Marzi, G.; Di Zenobio, A.; Fiamozzi Zignani, C.; Gabellieri, L.; Lampasi, A.; Maddaluno, G.; Maffia, G.; Marocco, D.; Mazzitelli, G.; Messina, G.; Mirizzi, F.; Moneti, M.; Muzzi, L.; Pizzuto, A.; Ramogida, G.; Ravera, G. L.; Righetti, R.; Roccella, S.; Starace, F.; Tomassetti, G.; Tuccillo, A. A.; Tudisco, O.; Turtù, S.; Villari, S.; Viola, B.; Vitale, V.; Vlad, G.; Zito, P.; Zonca, F.; Bruschi, A.; Farina, D.; Figini, L.; Garavaglia, S.; Granucci, G.; Lontano, M.; Micheletti, D.; Nowak, S.; Sozzi, C.; Albanese, R.; Ambrosino, R.; Barbato, L.; Ciattaglia, S.; Coccorese, D.; Coccorese, D.; Magistris, De; Gironimo, Di; Loschiavo, G.; V. P., ; Martone, R.; Marzullo, D.; Mastrostefano, S.; Minucci, S.; Mozzillo, R.; Palmaccio, R.; Pericoli-Ridolfini, V.; Pironti, A.; Rubinacci, G.; Tarallo, A.; Ventre, S.; Villone, F.; Maggiora, R.; Milanesio, D.; Agostinetti, P.; Bolzonella, T.; Carraro, L.; Fassina, A.; Franz, P.; Gaio, E.; Gnesotto, F.; Innocente, P.; Luchetta, A.; Manduchi, G.; Marrelli, L.; Martin, P.; Peruzzo, S.; Piovan, R.; Puiatti, M. E.; Spizzo, G.; Scarin, P.; Sonato, P.; Spolaore, M.; Toigo, V.; Valisa, M.; Zanotto, L.; Gorini, G.; Giruzzi, G.. - In: NUCLEAR FUSION. - ISSN 0029-5515. - 57:1(2017), pp. 1-13. [10.1088/0029-5515/57/1/016010]
DTT: A divertor tokamak test facility for the study of the power exhaust issues in view of DEMO
Albanese R.;R. Ambrosino;D. Coccorese;de Magistris;Di Gironimo;G. Loschiavo;Minucci S.;R. Mozzillo;Pironti A.;Rubinacci G.;A. Tarallo;F. Villone;
2017
Abstract
In parallel with the programme to optimize the operation with a conventional divertor based on detached conditions to be tested on the ITER device, a project has been launched to investigate alternative power exhaust solutions for DEMO, aimed at the definition and the design of a divertor tokamak test facility (DTT). The DTT project proposal refers to a set of parameters selected so as to have edge conditions as close as possible to DEMO, while remaining compatible with DEMO bulk plasma performance in terms of dimensionless parameters and given constraints. The paper illustrates the DTT project proposal, referring to a 6 MA plasma with a major radius of 2.15 m, an aspect ratio of about 3, an elongation of 1.6-1.8, and a toroidal field of 6 T. This selection will guarantee sufficient flexibility to test a wide set of divertor concepts and techniques to cope with large heat loads, including conventional tungsten divertors; liquid metal divertors; both conventional and advanced magnetic configurations (including single null, snow flake, quasi snow flake, X divertor, double null); internal coils for strike point sweeping and control of the width of the scrape-off layer in the divertor region; and radiation control. The Poloidal Field system is planned to provide a total flux swing of more than 35 Vs, compatible with a pulse length of more than 100 s. This is compatible with the mission of studying the power exhaust problem and is obtained using superconducting coils. Particular attention is dedicated to diagnostics and control issues, especially those relevant for plasma control in the divertor region, designed to be as compatible as possible with a DEMO-like environment. The construction is expected to last about seven years, and the selection of an Italian site would be compatible with a budget of 500 M.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
