In this paper, a novel curvature sensor, is showed. The proposed sensor is based on two FBGs, properly embedded in a 3D printed patch: the FBGs measure the strain in two point at a different distance from the monitored structure and the curvature of the structure under test is estimated from the difference in their strain. The simple and compact sensor exhibits a curvature sensitivity of 1.39 nm/m-1 with a resolution equal to $7.2cdot 10^{-4},, ext{m}^{-1}$. The curvature test shows a very excellent agreement between the curvature recorded with the new sensing device and that of the reference sensor. Neutral axis position of the monitored structure can be also estimated with this sensor.
Curvature Sensor Based on FBGs Embedded in 3D Printed Patches / Di Palma, P.; Iadicicco, A.; Campopiano, S.. - In: IEEE SENSORS JOURNAL. - ISSN 1530-437X. - 21:16(2021), pp. 17868-17874. [10.1109/JSEN.2021.3083961]
Curvature Sensor Based on FBGs Embedded in 3D Printed Patches
Di Palma P.;Iadicicco A.;Campopiano S.
2021
Abstract
In this paper, a novel curvature sensor, is showed. The proposed sensor is based on two FBGs, properly embedded in a 3D printed patch: the FBGs measure the strain in two point at a different distance from the monitored structure and the curvature of the structure under test is estimated from the difference in their strain. The simple and compact sensor exhibits a curvature sensitivity of 1.39 nm/m-1 with a resolution equal to $7.2cdot 10^{-4},, ext{m}^{-1}$. The curvature test shows a very excellent agreement between the curvature recorded with the new sensing device and that of the reference sensor. Neutral axis position of the monitored structure can be also estimated with this sensor.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
